Dacor Range Igniter Problems

Dacor range ignition problems fall into two families: a burner that clicks but will not light, and a burner that lights but keeps clicking. Both come back to the same short list of parts, the burner cap, the individual igniter, and the shared spark module. The pattern, one burner or all of them, tells you which one to look at first.

One Burner Versus All Burners

If a single burner misbehaves and the rest are fine, the problem is that burner's own cap, ports, or igniter. If every burner clicks together, the shared spark module or moisture is the cause, since one module drives them all. That distinction saves a lot of time.

Clean First, Then Diagnose

Lift the burner cap, clean and dry it, clear the ports, and check the igniter tip is not fouled. Reseat the cap square. A cap set slightly off or a wet igniter causes most clicking and no-light faults, and the fix costs nothing. If the burner still will not light or will not stop clicking, the igniter or module needs replacing.

Symptom	Likely Cause	Our Fix
One burner clicks, will not light	Fouled cap or ports	Clean and reseat cap, clear ports
Still clicks after cleaning	Failed individual igniter	Replace burner igniter
All burners click together	Moisture or spark module	Dry thoroughly, replace module
Clicks after lighting	Igniter not sensing flame	Clean or replace igniter

What You Can Try, and Where to Stop

Cleaning and reseating caps and drying the cooktop are safe and often enough. Replacing igniters or a spark module involves the gas and electrical systems and should be done by a technician who can test and verify reliable lighting.

Frequently Asked Questions

Why Does My Dacor Range Keep Clicking After It Lights?

Clicking that continues after the flame catches usually means the spark module is not sensing the flame, often because of a wet or misaligned burner cap or a dirty igniter. Dry and reseat the cap and clean the igniter tip. If it keeps clicking, the igniter or module needs service.

Why Will One Dacor Burner Not Light While the Others Do?

A single dead burner points at that burner's own parts: a clogged port, a misaligned cap, or a failed individual igniter. Since the others light, the shared spark module and gas supply are fine. Cleaning the cap and ports first often revives it.

Is It Safe to Keep Using a Clicking Dacor Range?

If the burner lights and then clicks, it is usually safe but annoying, and worth fixing before the igniter fails fully. If a burner releases gas without lighting, turn it off and do not use it. Never use a flame if you smell a strong gas odor; call for service.

Related